The SPEED-PACK II is purpose-built for thin-wall packaging production. Precision Hydraulics technology, developed with Japanese hydraulic expertise, delivers silky-smooth mechanical motion at up to 500mm/s injection speed with sub-millimeter accuracy. Dry cycles as short as 1.5 seconds. Packaging-specific plasticising unit with specialty screw design for up to 50% higher injection speed and enhanced melt quality.
All three are part of Chen Hsong’s high-speed packaging series and share Precision Hydraulics technology. The SPEED (128-468T) is a versatile high-speed servo-hydraulic machine suitable for packaging and other fast-cycle applications.
The SPEED-PACK II (260-570T) is purpose-built for thin-wall packaging with a packaging-specific plasticising unit, up to 500mm/s injection speed, and dry cycles as short as 1.5 seconds.
The SUPER PACK (430-1550T) is designed for maximum output at larger scale with accumulator injection, a 29% larger power pack, and 51% higher plasticising rate.
Precision Hydraulics is Chen Hsong’s proprietary hydraulic technology developed with high-end Japanese hydraulic expertise. It optimises the entire hydraulic circuit, removing kinks and shocks, to achieve silky-smooth and highly repeatable mechanical motion.
Third-party tests have repeatedly shown that machines equipped with Precision Hydraulics perform close to high-end Japanese hydraulic offerings.
Combined with a high-response servo system and closed-loop control over a high-speed EtherCAT digital bus, it delivers sub-millimeter precision and 0.05% repeatability in critical movement axes.
The SPEED-PACK II is designed for high-speed thin-wall packaging production: food containers, takeaway packaging, dairy cups, ice cream tubs, caps, closures, and IML (in-mold labeling) applications.
It is particularly well suited for 24/7 production environments where consistent cycle times, low scrap rates, and high output are critical to profitability.
The SPEED-PACK II uses Precision Hydraulics technology developed with Japanese hydraulic expertise, delivering smooth and precise motion that third-party tests show performs close to high-end Japanese hydraulic machines.
The machine base is 50% more rigid than industry standard, with thickened platens and advanced alignment from Japanese mechanical design.
The result is higher consistency and lower scrap rates in 24/7 thin-wall production, where the quality of motion matters more than peak injection speed alone.
Yes. The SPEED-PACK II is widely used for in-mold labeling (IML) production. Its combination of high injection speed, precise platen movement, and fast dry cycles makes it well suited for IML food containers, dairy packaging, and consumer goods packaging.
Robot interface terminal box is standard, and EUROMAP 12 and EUROMAP 67 robot interfaces are available.
Chen Hsong provides installation, training, maintenance, and technical support through more than 120 service locations worldwide.
The high-speed packaging series is supported by dedicated service teams with specialist expertise in high-speed production environments.
EUROMAP and SPI mold standards. B&R, KEBA, and Beckhoff controller options available by region. Local service support in 85+ countries.
